Hopp til innholdet

Reloop RP-8000

Advanced Hybrid Torque Turntable

NEXT GENERATION TURNTABLE CONTROLLER
The Reloop RP-8000 combines modern DJ technology in an advanced turntable. This hybrid high torque turntable does the balancing act between approved direct drive technology and a digital control section for your DJ software. The RP-8000 is able to communicate with any midi compatible DJ software - an additional modular controller is not necessary anymore. Serato Scratch Live mappings are also available with which the worldwide most popular and stable DVS system can be controlled. With the Trax encoder it is possible to scroll through your playlists and comfortably load tracks onto the decks.

FEATURES
Advanced Hybrid Torque Turntable
Digital DJ turntable with upper-torque direct drive
MIDI compatible control section consisting of Trax encoder, 8 backlit drum pads and 4 combinable performance modes (cue, loop, sample and slicer)
Large Trax encoder
Auto deck-assign feature
Turntable link USB port
Digital LC-Display for pitch display, BPM value, deck assignment and firmware settings
New features with firmware update 0.13 and Serato DJ 1.7
BPM can be shown on the pitch display
Adjustable global sampler volume
Looped slicer mode
Loop shift
Adjustable start/brake (0.2 - 6 seconds) & torque (1600 - 4500 g/cm)
Metal top panel with metallic finish
Phono and line output (no grounding necessary)
Direct connection of turntable and motor for best possible stability
Especially heavy finish
High end tonearm
Pitch range +/-8%, +/-16%, +/-50%
High resolution pitch fader (0,02% Resolution)
LCD pitch display
Easy to exchange, freely revolvable needle illumination with super bright LED
Quartz lock
Safety power switch
Reverse switch
2 start/stop buttons for vertical positioning
Smart USB link for up to 4 turntables
Rubber inlay for reduction of vibrations and ambient noise
Removable mains and RCA cables
Sunk-in connection cavity for easy case installation
Shock proof feet
Vibration-resistant base
Serato Scratch Live mappings available
Native Instruments Traktor mappings available
Plug'n Play with Serato DJ (min 1.6.2)

TECHNICAL DATA
Type: manual quartz direct drive turntable with MIDI control
Drive: quartz driven upper-torque direct drive
Motor: brushless DC motor
3 speeds, fully manual
Turntable RPM: 33 1/3, 45 and 78 RPM
Turntable: aluminum die casting
Pitch: variably adjustable +/-8%, +/-16%, +/-50%
Torque: adjustable from min. 1600 - 4500 g/cm
Start-up time/tempo change: less than 0.2 sec.
Brake system: electronic brake
Wow and flutter: 0.02% WRMS*
S/N ratio: more than -55 dB (1 kHz, 4mV input)
Admissible cartridge weight range: 3.5 - 8.5 g (incl. headshell 13 - 18 g)
Anti-skating range: 0 - 3 g
2x start/stopp buttons
Adjustable start/stop time (0.2 - 6 sec.)
Power input: 14 W
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Dimensions: 458 x 144.6 x 354 mm
Weight: 9.7 kg
Incl. USB cable, slipmat, tone arm illumination, but without stylus and headshell
Impact of stylus, record and tone arm remain not taken into account.
*Note:
Subject to alterations.
Specified data of approximate value.

Read more

Leveringstid ca 7 til 14 virkedager
5499,-
4649,-
Artikkelnr: 941769

Produktinformasjon


NEXT GENERATION TURNTABLE CONTROLLER
The Reloop RP-8000 combines modern DJ technology in an advanced turntable. This hybrid high torque turntable does the balancing act between approved direct drive technology and a digital control section for your DJ software. The RP-8000 is able to communicate with any midi compatible DJ software - an additional modular controller is not necessary anymore. Serato Scratch Live mappings are also available with which the worldwide most popular and stable DVS system can be controlled. With the Trax encoder it is possible to scroll through your playlists and comfortably load tracks onto the decks.

FEATURES
Advanced Hybrid Torque Turntable
Digital DJ turntable with upper-torque direct drive
MIDI compatible control section consisting of Trax encoder, 8 backlit drum pads and 4 combinable performance modes (cue, loop, sample and slicer)
Large Trax encoder
Auto deck-assign feature
Turntable link USB port
Digital LC-Display for pitch display, BPM value, deck assignment and firmware settings
New features with firmware update 0.13 and Serato DJ 1.7
BPM can be shown on the pitch display
Adjustable global sampler volume
Looped slicer mode
Loop shift
Adjustable start/brake (0.2 - 6 seconds) & torque (1600 - 4500 g/cm)
Metal top panel with metallic finish
Phono and line output (no grounding necessary)
Direct connection of turntable and motor for best possible stability
Especially heavy finish
High end tonearm
Pitch range +/-8%, +/-16%, +/-50%
High resolution pitch fader (0,02% Resolution)
LCD pitch display
Easy to exchange, freely revolvable needle illumination with super bright LED
Quartz lock
Safety power switch
Reverse switch
2 start/stop buttons for vertical positioning
Smart USB link for up to 4 turntables
Rubber inlay for reduction of vibrations and ambient noise
Removable mains and RCA cables
Sunk-in connection cavity for easy case installation
Shock proof feet
Vibration-resistant base
Serato Scratch Live mappings available
Native Instruments Traktor mappings available
Plug'n Play with Serato DJ (min 1.6.2)

TECHNICAL DATA
Type: manual quartz direct drive turntable with MIDI control
Drive: quartz driven upper-torque direct drive
Motor: brushless DC motor
3 speeds, fully manual
Turntable RPM: 33 1/3, 45 and 78 RPM
Turntable: aluminum die casting
Pitch: variably adjustable +/-8%, +/-16%, +/-50%
Torque: adjustable from min. 1600 - 4500 g/cm
Start-up time/tempo change: less than 0.2 sec.
Brake system: electronic brake
Wow and flutter: 0.02% WRMS*
S/N ratio: more than -55 dB (1 kHz, 4mV input)
Admissible cartridge weight range: 3.5 - 8.5 g (incl. headshell 13 - 18 g)
Anti-skating range: 0 - 3 g
2x start/stopp buttons
Adjustable start/stop time (0.2 - 6 sec.)
Power input: 14 W
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Dimensions: 458 x 144.6 x 354 mm
Weight: 9.7 kg
Incl. USB cable, slipmat, tone arm illumination, but without stylus and headshell
Impact of stylus, record and tone arm remain not taken into account.
*Note:
Subject to alterations.
Specified data of approximate value.

Read more

logotypes-no.png
 

 

Produktet er lagt i handlevognen